VEMAG AUSTRALIA PTY LTD
VEMAG AUSTRALIA PTY LTD
Seydelmann High Efficiency Cutter / Grinders
The Seydelmann Cutter
Due to its seamless, largely solid stainless-steel construction the Seydelmann Cutter is very robust and easy to clean. All edges are rounded and polished. The entire cover is free of screws and edges in which dirt or bacteria could gather. Transparent and unbreakable noise absorbing cover. No cast-iron or mild steel profiles clad with thin stainless sheets. No dents in case machine is hit by trolleys etc. All machines are closed at the bottom with a stainless bottom and equipped with a ventilation system (airing and de-airing). Solid construction for best possible smooth operation associated with the double-walled cover construction ensures optimal noise reduction. User friendly knee switches on the bowl outside, exactly at the user’s operating position. As the machine is operated with a knee, the user’s hands are always free for loading and unloading of the Cutter.
Seydelmann Grinders
Stainless worm housing, stainless worm, stainless union nut or stainless bayonet locking* for highest demands in hygiene and quality. Mechanical wear-off of the worm housing is largely prevented using a special material. Moreover, the worm housing is equipped with a trapezoidal thread which by contrast to a conventional fine-pitch thread endures the toughest use on a long-term basis. The bottom of the machines is closed with stainless-steel. Motors are insulated against humidity and totally closed (IP55). Drive largely wear and maintenance-free. Waterproof panel box built into the machine.
Seydelmann Automatic Grinders
Largely of solid stainless steel. Worm, worm housing with trapezoidal thread and union nut or bayonet locking* are made of solid stainless steel. Especially strong 2-speed main drive of the working worm largely wear- and maintenance-free. Strong 2-speed drive for the wide conical feeding worm. Very high throughput and clear cut with any consistency, size and temperature of the source material. The speeds of the feeding worm and the working worm can be used independently of each other. The conical feeding worm of up to approx. 270 mm diameter takes up large pieces of meat and safely transports them to the working worm without forming bridges.
Automatic Mixing Grinders
Largely of solid stainless steel. Worm, worm housing with trapezoidal thread and union nut or bayonet locking* are made of solid stainless steel.With the Automatic Mixing Grinders two working steps, mixing and grinding, can be optimally combined. Especially strong 2-speed main drive of the working worm largely wear and maintenance-free. Strong 2-speed drive for the wide conical feeding worm. Very high throughput and clear cut with any consistency, size and temperature of the source material. The speeds of the feeding and working worm can be operated independently.