Meat dicers

A meat dicer cuts blocks, logs and loose pieces into even cubes and strips for stews, pizza toppings, ready meals and pet food. The Holac Cubixx range and the VEMAG VS150 cover everything from a compact batch dicer to continuous pre-cutting of meat and fat.

PicturedCubixx 120

Start with the product going into the dicer

The shape of the raw product narrows the choice before output does. Loose trim and irregular pieces need a chamber that closes and presses them into a block before the cut. Pre-formed logs of ham, sausage or cheese go through a magazine sized to the log. Large pieces of meat and fat that only need to be reduced for the next machine are better suited to a continuous dicer.

Bring the dimensions of your biggest piece or log, its temperature at the dicer, and the cut sizes you sell. Note whether you want cubes, strips or both from the same machine, and how often you change between them in a shift.

Dicers in the catalogue

Each card opens the machine’s own page with its published data. The groups below explain how the models differ.

The Holac Cubixx range

Every Cubixx model in our catalogue has a fully sealed product loading chamber with drainage, a two-part cutting grid, and hardened shear edges with product stabilisers. Holac reports more than 1,000 Cubixx dicers in the market worldwide.

  • Cubixx 100 L: computer controlled, compact and on wheels. Holac lists it for diced meat for stews, meat strips for frying, ham strips and grated cheese.
  • Cubixx 100 LP: the smallest fully automatic dicer in the range, with magazine loading by a hydraulically driven sidewall and a guillotine cut-off blade.
  • Cubixx 120: the semi-automatic multipurpose model, with lateral pre-pressing, a product pre-loading position and an integrated discharge conveyor. It handles loose and pre-formed products, including meat, cased products, sausage and cheese.
  • Cubixx 120 LP and 120 U: built for pre-formed logs. The LP loads its magazine with a hydraulic sidewall and guillotine; the U has a U-shaped magazine with a hydraulically powered cut-off blade.
  • Cubixx 150 LP: the largest model in the series, for loose and pre-formed meat, bacon, sausage and cheese. Holac lists loading by feeding conveyor or by 200-litre trolleys with a hoist lifter.

Continuous pre-cutting with the VEMAG VS150

The VS150 is a multipurpose dicer and size reduction machine with a continuous product flow. VEMAG publishes a maximum of 10,000 kg/h depending on product, a loading opening of 150 × 150 mm with a length of 900 to 1,200 mm, a feed motion of 1 to 75 mm and cutting grids from 6 × 6 mm to 75 × 75 mm.

It is aimed at pre-cutting meat and fat before the next stage of processing, rather than producing a finished retail dice from formed logs.

Pre-cut meat often goes on to a grinder. Compare the options on our industrial meat grinders page.

Slices and cheese cuts

If the product needs slices rather than cubes, the Holac SECT 360 TC is a portion cutting machine with servo-controlled feed. It can cut groups of identical or varying slice thickness. For dairy plants, the Holac Cheesixx cuts cheese into dice, sticks, flakes, triangles and shreds.

The full range of cutting machines, including strip cutters and slicers, is on the slicers and dicers page.

Request a dicer quote

Send us the products you dice, the largest piece or log size, the temperature at the dicer, your cut sizes and the kilograms you need per shift. Tell us how product will be loaded and where the diced product goes next.

Vemag Australia is the official Holac distributor for Australia and New Zealand. You can run your own product through a dicer at the Customer Centre before you decide.

Meat dicer questions

Can one dicer cut both cubes and strips?

Yes. The cut is set by the cutting grid and the feed length, so the same machine can produce cubes or strips. Tell us which sizes you need so the right grids are included in the quote.

Which Cubixx suits pre-formed logs?

The Cubixx 120 LP and 120 U are built for cutting pre-formed logs and differ in their magazine. The Cubixx 120 and 150 LP take both loose and pre-formed products.

Can a meat dicer also cut cheese?

Several Cubixx models are listed for cheese as well as meat, including the 100 L for grated cheese and the 120 and 150 LP for cheese products. For dedicated cheese cutting, look at the Holac Cheesixx.

What is the difference between the VS150 and a Cubixx?

The VS150 cuts in a continuous flow and is aimed at pre-cutting meat and fat in volume. The Cubixx models work from a closed chamber or magazine and suit finished dice, strips and log products.

Contact

Discuss your dicing line

Share your products, cut sizes and output with Vemag Australia.